招聘职位信息

Location: Shanghai, China

Responsibilities:

• Develop algorithms and design hardware extending the state of the art in hardware support for computer graphics. Working within a team of graphics architects to document, design, develop functional and performance simulators, validate and verify each new chip.
• Develop tests, testplans, and testing infrastructure for new graphics architectures.
• Develop methodologies and tools for validating test results.
• Design and implement automated testing strategies. Test and debug CMODELs, RTL simulation and real silicon.
• Write and run low-level graphics tests which expose architectural performance characteristics of competitors' graphics chips. Compare results with Nvidia graphics chips. Find shortcomings and strong points of each. Work with architects to determine underlying causes. Publish and maintain results.

Minimum Requirements:

• MS in CS, EE or Math
• Great interest in the algorithms of computer graphics.
• Relevant industrial experience preferred. Relevant industries include PC or workstation graphics hardware or software development, digital video or image processing, video game software development, rendering software or tools development.
• Strong C, C++ programming ability, Perl preferred.

Location: Shanghai, China

Responsibilities:

• ASIC Design for graphics and video processors.
• Micro-architecture definition; working closely with video / graphics and system architects.
• RTL design, verification, emulation, synthesis, timing, and silicon bring-up.

Minimum Requirements:

• MS in EE or related area
• Strong RTL programming ability, familiar with all aspects of the front-end ASIC design flow
• Strong programming skills in C/C++, PERL preferred.

Location: Shanghai, China

Responsibilities:

• Run Static Timing Analysis (STA) at the both the block and full chip level using industry standard STA tools
• Work in conjunction with Place and Route Engineers to achieve timing closure
• Develop tcl and dc-shell scripts for performing ECO's.
• Contribute to the ongoing development and enhancement of our entire timing methodology

Minimum Requirements:

• MS in Electrical Engineering or Computer Science
• Strong RTL programming ability, C/C++ and Perl preferred
• Great interest in the area of ASIC physical design, Static Timing Analysis and RTL

Location: Shanghai, China

Responsibilities:

• Responsible for all aspects of physical design and implementation of Graphics processors, integrated chipsets and other ASICs targeted at the desktop, laptop, workstation, set-top box and home networking markets.
• Participating in the efforts in establishing CAD and physical design methodologies, flow automation, chip floorplan, power/clock distribution, chip assembly and P&R, timing closure, - Static timing analysis, power and noise analysis and back-end verification across multiple projects.

Minimum Requirements:

• MSEE or MSCS
• Project experience in VLSI physical design implementation
• Understanding of Macro blocks such as RAMs, CAMs, high-speed IO drivers
• Understanding Timing, clock/power distribution and analysis, RC extraction, and basic concept of place and route
• Knowledge of deep sub-micron device model, and processing technology
• Circuit level comprehension of time critical paths, Spice experience a plus
• Experience with CAD tools from Synopsys (Astro/PC/dc_shell/pt_shell/STAR-RC), Cadence (FE/Nanoroute), Sequence (Physical Studio), Mentor or Magma
• Proficiency using Perl, TCL, and Make scripting is preferred.
• Courses taken in digital design, logic design and verilog synthesis

Location: Shanghai, China

Responsibilities:

• High performance, low power custom circuit design for graphics processors.
• Circuit architecting, simulation and characterization of custom design circuit.
• Logic equivalence checking and transistor level function verification.
• Participating in building CAD flow for circuit design.
• Layout floorplanning and supervision.

Minimum Requirements:

• BSEE minimum, MSEE preferred.
• Strong background in deep submicron CMOS process and device.
• Good knowledge in high speed circuit design techniques.
• Understanding of on-chip interconnet and signal integrity.
• Experience in circuit simulation, schematic capture and layout verification CAD tools.
• Must be a team player with effective written and verbal communication skills.
• Must be able to learn quickly and work independently.

Location: Shenzhen, China

Responsibilities:

• Provide direct technical support with customers on CUDA applications development issues.
• Provide technical information and support.
• Assist developers with identifying bottlenecks and inconsistencies in their CUDA application.
• Promotion CUDA to researchers, consumer application software developers, professional application software developers.
• Get researchers to use CUDA in their research.
• Get consumer application software developers to improve their products using CUDA.
• Get professional application software developers to improve their products using CUDA.
• Provide and organize CUDA trainning and tutorials.

Minimum Requirements:

• BS or MS in Computer Science or Electrical Engineering, or related degree.
• Good understanding of programming languages is needed.
• Strong C/C++ programming skills. Javasript is a plus.
• Strong software debugging capability and experiences.
• Keep up to date with leading edge technologies.
• Ability to multiplex many issues, set priorities, and work in a team environment.
• Familiarity with computer system architectures and the hardware/software interface layer models.
• Experience in parallel scientific computing, video encoder/decoder, digital image processing is a plus.
• Familiar with DirectShow, OpenCL, 3D graphics APIs, Direct3D or/and OpenGL is a plus.
• Excellent communication skills.
• Good Oral and written communication skills in English.

Location: Shenzhen, China

Responsibilities:

• Hardware Design for Graphics card and Mobile Device (Smartphone, PDA, MID, Netbook)
• Board level circuit research and Development
• Schematic concept design, Component selection and Bill of Material generation
• Board level Hardware debug and verification
• Responsible for product design issue in overall life time cycle
• Guide PCB layout engineer for placement, power and high speed signals routing
• Guide design Validation engineer for signal measurement
• Co-work with chip solution team for chip level bring up
• Co-work with BIOS & driver engineer on debug and FA

Minimum Requirements:

• BS/MSEE

Desirable Experience:

• Can do attitude
• High energy
• Leadership
• Ability to learn complex concepts in a fast pace environment
• Strong desire on creativity
• Quick thinking and good decision making skills
• Good communication skills (written and oral)

Location: Shenzhen, China

As the board level PCB design engineer role, this postion is responsible for all NVIDIA chip solutions' projects PCB design. The job is taking the responsibility of transferring the schematic design into the printed circuit board basing on signal intergirity requirement, power intergrity requirement, EMC regulatory requirement, manufacture requirement and end-user usability requirement.

Qualifications:

• Bachelor or Master Degree in Electronics Engineering
• Strong knowledge on the circuit theory, especially for analog circuit design
• Good knowledge on the DC-DC power design
• Good knowledge on the signal intergirty theory
• Good knowledge on the power intergrity theory
• C is must, C++ and JAVA are preferred, Direct x is a plus.
• Good knowledge on the EMC, EMI, Safety techniques
• Good knowledge on PCB fabrication and assembly.
• Good knowledge on PC architecture.
• Can do attitude
• High energy, Ability to learn complex process and concept in a fast pace environment
• Quick thinking and good decision making skills
• Self-motivated,patient, desire to take challenges.
• Good communication skills ( Written and oral)
• Level 4 or 6 English

Location: Shenzhen, China

Board / System Qualifying Engineer for PC systems and graphics products. This position will be responsible for qualification and signal integrity measurement of state-of-the-art board level system using NVIDIA silicon chip products. Qualification and signal integrity measurement may include desktop PC motherboards, notebook motherboards, graphics cards, embedded system products, multimedia systems, and more. Contribute system and board level engineering expertise to specification and design of the latest complex products. Successful candidate will be in a dynamic engineering environment, with the opportunity to participate in a wide variety of exciting and challenging projects.

To understand this position and apply it successfully, following descriptions/requirements are Very important.

Responsibilities:

• Qualification and signal integrity measurement for next generation PC and graphics platforms
• Signal integrity/DC-DC Power solutions testing and debugging
• Signal integrity failure analysis
• Signal quality measurement and analysis of high speed busses
• Signal quality measurement and analysis of analog DC/DC power designs
• Signal quality measurement and analysis of digital and analog display signals

Minimum Requirements:

• You must be a current student studying BS/MSEE
• Experience with PC architecture
• Good system knowledge of Desktop PC motherboards, Notebook motherboards, Graphics, handheld products, embedded systems.
• knowledge with at least 2 of the followings: Signal integrity, Switch power supply, High speed bused such as PCI/PCI Express busses, SDRAM/DDR.
• Good English speaking and listening.

Desirable Experience:

• Experience in measuring/designing DC/DC power solution.
• Experience with using high speed oscilloscopes for signal quality measurement is a plus (e.g. Tektronics TDS7404, DSA71254)
• Experience in designing experiments and evaluating results are preferred.
• Matlab/Labview is preferred
• ARM application

Location: Shenzhen, China

Board / System Qualifying Engineer for PC systems and graphics products. This position will be responsible for ensuring Quality, Reliability and Compatibility of NVIDIA products. Including desktop PC motherboards, notebook motherboards, graphics cards, embedded system products, multimedia systems, and more. Contribute system and board level engineering expertise to specification and design of the latest complex products. Successful candidate will be in a dynamic engineering environment, with the opportunity to participate in a wide variety of exciting and challenging projects.

To understand this position and apply it successfully, following descriptions/requirements are Very important.

Responsibilities:

• Perform reliability and compatibility test for next generation PC and graphics platforms
• Make necessary modification on test case and test plan; ensure test coverage and avoid any issue escape
• Develop necessary test tools and automation used for test and validation
• Improve reliability and efficiency of validation process .
• Provide debug and trouble shooting recommendation to design team.

Minimum Requirements:

• You must be a current student studying BSEE
• Experience with PC architecture
• Good system knowledge of Desktop PC motherboards, Notebook motherboards, Graphics.
• Be familiar with both Windows and Linux and popular applications
• Good English speaking and listening.

Desirable Experience:

• Experience in designing experiments and evaluating results are preferred.
• MC/C++ programming is preferred
• ARM application

Extra Information:

• The work location of this position is in Foxconn Campus, Longhua, Shenzhen

Location: Shenzhen, China

Responsibilities:

• Handle projects from initiation through delivery.
• Communicate the issue status to the engineers in both internal & external teams.
• Organizes the interdepartmental activities ensuring completion of the project on schedule & deliverable
• Work closely with the design & testing teams, regularly communicate the program status and key issues to management.

Minimum Requirements:

• B.S degree in E.E or computer science
• Fluent English in spoken and written, CET 6 (College English Test, Band 6)
• Good communication and organization skill, and with team work experienced.
• Research experience on graphic processing, virtual reality and gaming is preferred
• Strong interest and basic knowledge about industry trends, technologies, and solutions is preferred.
• Self-motivated, responsible, able to work under tight deadline and willing to work under pressure.

Location: Shenzhen, China

Designs, defines and implements complex system requirements for customers. Supports the entire product lifecycle from New Product Introduction(NPI) to obsolescence.

Responsibilities:

• Prepares studies, analyzes existing systems and uses this data to meet customer specifications
• Qualify memory subsystem on NVIDIA boards
• Determines system specifications and working parameters for hardware/software compatibility
• Collect and analyze signal integrity data using high speed oscilloscopes
• Work with NVIDIA engineering groups to support released boards
• Work with new derivative boards or new boards with alternate components
• Collect and analyze signal integrity of affected circuits using advanced test equipment
• Work with SW team to generate BIOS and ensure BIOS works on new boards
• Develops, recommends and implements corrective actions

Minimum Requirements:

• BSEE (or equivalent) required. Must have the ability to work well in a team environment and have good written and verbal communication skills.

Location: Shenzhen, China

Designs, defines and implements complex system requirements for customers. Supports the entire product lifecycle from New Product Introduction(NPI) to obsolescence.

Responsibilities:

Design and development systems engineer for embedded microcontroller and PC systems.
Responsibility includes schematic design, programmable logic design, BOM generation, board bring-up, debug and validation, integration with target platform/application. Work on board designs of future multimedia embedded projects eg RF version for stereo glasses, adding new features, cost reductions, etc

Minimum Requirements:

• MS or Ph.D in Elecrtonic or electronic and electrical degree.
• Experience of microcontroller, embedded application processors and PC systems
• Excellent knowledge of FPGA programming in verilog or VHDL
• Experience of schematic and FPGA design tools
• Excellent English language skills to work effectively with global development teams
• (Knowledge of RF systems design or experience of assembly language, C or C++ would be a bonus)

Location: Shenzhen, China

Responsibilities:

You will be a member of Nvidia Compliance Engineering team in our Shenzhen Design Center. The major function of this group is to aggressively design and develop high performance 3D graphics system products. Your responsibility will include signal integrity analysis, EMC design and optimization, product safety design and evaluation. You will also work with 3rd party independent laboratories and agencies for product regulatory compliance approvals.

Minimum Requirements:

• Qualified candidates should have a MSEE or PhD preferred.
• Favored to have major in micro wave or radio technology.
• A good knowledge of transmission line analysis. Hands on experience of lab measurement tools such as oscilloscope, TDR, VNA and spectrum analyzer is a plus.
• ExCommunication skills in English are required.

Location: Shenzhen, China

Responsibilities:

Design, implement, modification, test and documentation of firmware, drivers and test applications for small microcontroller, embedded application processors and PC based system. Work on future embedded low level software development and bring up of multimedia embedded projects eg RF version for stereo glasses, add new features, cost reductions, firmware updates etc

Minimum Requirements:

• MS degree or higher in computer science, computer engineering or electrical engineering.
• Experience in assembly language, C, C++ and real time OS (RTOS).
• Good knowledge of hardware components in embedded and PC systems.
• Excellent English language skills to work effectively with global development teams
• Experience of developing RF systems or FPGA or PC boards would be a bonus

Location: Shenzhen, China

Responsibilities:

The successful candidate will support WINAPPS Testing for SZ based Control Runs.

Minimum Requirements:

• BS in Electrical Engineering or equivalent qualifications. MS desired.
• Good oral and written communication skills.
• Ability to setup system from scratch and install O/S and drivers.
• Knowledge of O/S including WIN 98, WIN XP, WIN VISTA and LINUX desired.
• Knowledge of graphics APIs, D3D, OGL, DX9, DX10, PCIE desired.
• Ability to work closely with Mfg Team and PMs

Location: Shenzhen, China

Job Description

• Follow all SBI, FCI, STP, make sure CEM works out its SOP, PMP according to NVIDIA documents.
• Perform First Article Inspection review to assure compliance to specifications.
• Audit CMs process and quality systems for compliance with NVIDIA requirements for manufacture of System assembly product and graphic card. prepare and follow QMP as specific product quality plan.
• Setup and daily monitoring of PCA and system assembly and test processes.
• Monitor performance through gathering relevant data and producing statistical reports.
• Providing technical support to CEM teams from NPI through mass production.
• Investigating operational problems affecting production.
• Troubleshooting and identifying root cause of factory line failures.
• Interfacing with HW/SW/TEST engineering teams to quickly and effectively contain any type of production issues.
• Responsible for ensuring execution of corrective actions and ongoing quality improvements at CM.
• Review and support engineering changes to eliminate ambiguity or conflicts with part fabrication.
• Assist with break-in analysis & tracking as needed.
• Work with internal team (planner, PM, buyer, Engineering) and CM factory to achieve production quality and delivery commitments.

Minimum Requirements:

• Bachelor degree, major in testing / mechanical / electronic engineering.
• Fluent English in writing and spoken, preferable certificated CET6.
• Ability to work under pressure in factory environment.
• Willing work over time or travel on business around Guangdong and Shanhai area.
• Hard-working, positive attitude and high spirit of team work.
• Knowledge of Tooling / SMT is a plus.

Location: Shenzhen, China

Job Description

• Follow all SBI, FCI, STP, make sure CEM works out its SOP, PMP according to NVIDIA documents.
• Perform First Article Inspection review to assure compliance to specifications.
• Audit CMs process and quality systems for compliance with NVIDIA requirements for manufacture of System assembly product and graphic card. prepare and follow QMP as specific product quality plan.
• Setup and daily monitoring of PCA and system assembly and test processes.
• Monitor performance through gathering relevant data and producing statistical reports.
• Providing technical support to CEM teams from NPI through mass production.
• Investigating operational problems affecting production.
• Troubleshooting and identifying root cause of factory line failures.
• Interfacing with HW/SW/TEST engineering teams to quickly and effectively contain any type of production issues.
• Responsible for ensuring execution of corrective actions and ongoing quality improvements at CM.
• Review and support engineering changes to eliminate ambiguity or conflicts with part fabrication.
• Assist with break-in analysis & tracking as needed.
• Work with internal team (planner, PM, buyer, Engineering) and CM factory to achieve production quality and delivery commitments.

Minimum Requirements:

• Bachelor degree, major in testing / mechanical / electronic engineering.
• Fluent English in writing and spoken, preferable certificated CET6.
• Ability to work under pressure in factory environment.
• Willing work over time or travel on business around Guangdong and Shanhai area.
• Hard-working, positive attitude and high spirit of team work.
• Knowledge of Tooling / SMT is a plus.

Location: Shenzhen, China

Job Description

• Follow all SBI, FCI, STP, make sure CEM works out its SOP, PMP according to NVIDIA documents.
• Perform First Article Inspection review to assure compliance to specifications.
• Audit CMs process and quality systems for compliance with NVIDIA requirements for manufacture of System assembly product and graphic card. prepare and follow QMP as specific product quality plan.
• Setup and daily monitoring of PCA and system assembly and test processes.
• Monitor performance through gathering relevant data and producing statistical reports.
• Providing technical support to CEM teams from NPI through mass production.
• Investigating operational problems affecting production.
• Troubleshooting and identifying root cause of factory line failures.
• Interfacing with HW/SW/TEST engineering teams to quickly and effectively contain any type of production issues.
• Responsible for ensuring execution of corrective actions and ongoing quality improvements at CM.
• Review and support engineering changes to eliminate ambiguity or conflicts with part fabrication.
• Assist with break-in analysis & tracking as needed.
• Work with internal team (planner, PM, buyer, Engineering) and CM factory to achieve production quality and delivery commitments.

Minimum Requirements:

• Bachelor degree, major in testing / mechanical / electronic engineering.
• Fluent English in writing and spoken, preferable certificated CET6.
• Ability to work under pressure in factory environment.
• Willing work over time or travel on business around Guangdong and Shanhai area.
• Hard-working, positive attitude and high spirit of team work.
• Knowledge of Tooling / SMT is a plus.

Location: Shenzhen, China

Responsibilities:

• Change and Configuration Management
• Support for Deviations creation
• Support for customer critical sample process and customer Qual sample process
• Provide training to other personnel (production and engineering) as needed
• Perform CM rediness reviews to ensure compliance with QMP/AVL and facility requirements
• Supporting and working closely with daily production, engineering, and management personnel
• Strong communication skills with shop floor and management teams
• Performs first article approval and product audits

Minimum Requirements:

• Minimum BS in engineering or related science from a four year university.
• Strong written and oral communication skills.
• Good problem solving and communication skills are a must.
• Proficiency in MS Office, MS Project, Windchill and Sharepoint is a plus.

Location: Shenzhen, China

This is a real development position & we're looking for a committed candidate that is interested in developing a long-term career plan as an experienced Program Manager.

We're expecting the candidate will be able to work independently after at least a 4-yr mentoring plan provided extensive exposures & on-the-job training by QT PM team through a daily Quick-Turn Operation.

After a 4-yr mentoring plan, we're expecting the candidate will be able to:-

• understand the knowledge in all stages of getting product to production.
• work independently under extensive exposures & on-the-job training given by QT PM team through daily Quick-Turn Operation
• work well in busy & matrix operation with multi-tasks skill.
• handle builds in various product types including Graphic Cards & Motherboards (& more).

Minimum Requirements:

• BS degree in any discipline
• MUST BE fluent in Putonghua and English, both written and oral
• MUST BE Hardworking, Flexible, detail-minded, goal & teamwork-oriented
• Flexible in working non-office hours which depends on the builds/projects

Location: Shenzhen, China

Responsibilities:

Will be required to manage daily supplier RMA repair schedules/replacement order commitments and delivery performance metrics.
Will be required to interface with Quality Management/Inventory Control/Production Control and cost accounting.

• Create & Manage Repair Production orders, PO's & customer deliveries for multiple production lines.
• Review repair capacity, replacement materials plans & rework production plans with CM's daily
• Provide commitments to Sales on repair plans & cycles.
• Provide priority to QM & FA team in HK
• Schedule reship customer orders daily

Minimum Requirements:

• Bachelor degree or above;
• Fluent in both verbal and written English;
• Have a strong sense of responsibility, courage to take the challenge;
• Familiar with the basic performance of electronic products, manufacturing operations and materials management ; having a basic understanding of the logic of MRP systems is preferred.
• Excellent communication skills and ability to be good at teamwork.

Location: Shenzhen, China

Job Description:

• Support the ADC sourcing team for supplier database maintenance, including documents, price list, supplier product list.
• Assist the sample collecting to fulfill the board build schedule in time.
• Assist the BOM cost comparison.
  

Minimum Requirements:

• Proficiency in Excel, Word, PowerPoint.
• Good in English capability
• Positive attitude and hardworking, willingness to learn on purchasing field.
• Business education with University degree.